Should I modify SFML???

[THe Floating Brain]

Okay so I finally think I have a rough idea of vectors and I wrote these functions
(Calculates a vector)
http://pastebin.com/h6KqWVKu
("Lightning" is the version of my engine)
(Moves a object along a vector)
http://pastebin.com/3dXv5WfQ
Problem being... despite all the long double variables I put the movement of a object along a vector is inaccurate (just slightly).

HELP!.jpg (10.51 KiB) Viewed 2365 times

The reason is that when I pass the "GotoX", and "GotoY" variables (from my function above) into SFML's .Move function the data is corrupted because .Move takes float variables instead of long double variables. So I am wondering if I should go through the trouble of changing SFML's .Move function to take long double's instead of float and possibly other functions and also compromise SFML's performance?

P.s Language = C++
P.s.s I know I sometimes have a hard time getting my point across so if any clarification is needed let me know

[GroundUpEngine]

Sometimes we should keep it simple, if you wanna use the SFML API as is.. just use float (up to 7 digits i believe, which is not bad) variables for your maths

[Ginto8]

... The fact that you're using long doubles when floats are all you need (and, more to the point, you're using an api that focuses on floats) proves that you are not yet at the level where you'd be capable of modifying SFML, disregarding that it really shouldn't be necessary at all.

It may interest you to know that SFML uses OpenGL for a backend, and OpenGL, although you can pass it doubles, converts everything to floats internally, so there really isn't much point anyway.

[GroundUpEngine]

It may interest you to know that SFML uses OpenGL for a backend, and OpenGL, although you can pass it doubles, converts everything to floats internally, so there really isn't much point anyway.

I was about to address that! Good point.

[THe Floating Brain]

... The fact that you're using long doubles when floats are all you need (and, more to the point, you're using an api that focuses on floats) proves that you are not yet at the level where you'd be capable of modifying SFML,

I know how (change the function args in the source and in bolth copies of the headers in VC++ and in C: if any warnings come up according to that also change them to long doubles)

It may interest you to know that SFML uses OpenGL for a backend, and OpenGL, although you can pass it doubles, converts everything to floats internally, so there really isn't much point anyway.

(I did know that SFML used openGL) So it realy doesent matter 0.0. Thing is though it is even less acurate when I dont use doubles so I am not sure what to do. Poeple told me that my vector calculation function is correct. :/ Not sure were to go here.

I was about to address that! Good point.

+1

just use float (up to 7 digits i believe,

actually its 6

[pritam]

There is a good reason using floats for movement, it's a lot smoother. If you need to run an if statement where your x/y variables reaches 300, use typecasting:

Code: Select all

if( (int)playerX )

Don't bother changing SFML, the effort is not worth it by far, there would hardly be improvement and you're not considering events where floats are necessary.

Edit: Actually typecasting doesn't round nicely, use this instead:

Code: Select all

(int) floor( f + 0.5f );

[THe Floating Brain]

But if it never equils the desired position that wont work.

[pritam]

But if it never equils the desired position that wont work.

Well, that's entirely up to you, use other operators.

[JesseGuarascia]

Hold on, let me get this straight. You want to change an entire API that is revolved around the float data type, because you want to use long doubles instead?

Also, Pritam's got it right. If you really desire a whole 300 constant value, just floor/ceil the thing. SFML's amazing; don't go breaking it because you're too lazy to change a long double to a float. :P

[GroundUpEngine]

just use float (up to 7 digits i believe,

actually its 6

Code: Select all

float lol = 1.234567;

+1

[MrDeathNote]

just use float (up to 7 digits i believe,

actually its 6

Code: Select all

float lol = 1.234567;

lol.

+2

This is a really odd thread, I find it really hard to believe that you're actually considering changing the SFML API for no good reason, a float should be more than enough to work with. If the values aren't being set right then you're doing something wrong. But the short answer to "Should I modify SFML???" is NO!!

[xiphirx]

I'm really confused....

How big are your input values? Do you know what the range of a long is?...

Code: Select all

//Calculate Magnitude.//
						GotoX -= Object.GetPosition().x;
						GotoY -= Object.GetPosition().y;
						long double Magnitude;

Why do you need a long double? float is fine...

Code: Select all

Magn(GotoX, GotoY, Magnitude);

Curious to see what that does... and why you couldn't just write the Pythagorean theorem out instead of having an odd function for it.

Code: Select all

//Go The Desired Speed.//
                                                GotoX *= Speed;
                                                GotoY *= Speed;

This is where your values are messed up, I think...

Just to note, it looks like you don't have a good grasp on vectors. If you did, you would have probably used SFML's own vector2f class :P

[N64vSNES]

If you did, you would have probably used SFML's own vector2f class :P

So...You want to fuck with SFML's source because you want to use a double over a float?

[Falco Girgis]

Okay so I finally think I have a rough idea of vectors and I wrote these functions
(Calculates a vector)
http://pastebin.com/h6KqWVKu
("Lightning" is the version of my engine)
(Moves a object along a vector)
http://pastebin.com/3dXv5WfQ
Problem being... despite all the long double variables I put the movement of a object along a vector is inaccurate (just slightly).

HELP!.jpg

The reason is that when I pass the "GotoX", and "GotoY" variables (from my function above) into SFML's .Move function the data is corrupted because .Move takes float variables instead of long double variables. So I am wondering if I should go through the trouble of changing SFML's .Move function to take long double's instead of float and possibly other functions and also compromise SFML's performance?

P.s Language = C++
P.s.s I know I sometimes have a hard time getting my point across so if any clarification is needed let me know

Honestly, why in fuck's name would you be using doubles? Why would you EVER need that kind of precision? That's only for exact numbers and scientific calculations.

And keep in mind that there is not a 1-to-1 relationship between an IEEE 32-bit single precision float (the variable you know as "float") and an integer. How many bytes are used to represent both? Float = 4 bytes. Integer = 4 bytes. They are literally the same size. They are literally both only capable of holding a permutation of their number of bits. So you are going to be missing some "exact" values that exist in an integer with a float. That's how it works.

You have no IDEA what the performance implications of using doubles usually is. Modern GPUs are only NOW starting to hardware accelerate doubles. A lot of the time the routines are written completely and software for GIGANTIC performance drops (because there's no support for the IEEE 64-bit float in hardware). We don't EVER use double precision floats in game development...

[THe Floating Brain]

God I feel realy embaressed

Honestly, why in fuck's name would you be using doubles? Why would you EVER need that kind of precision? That's only for exact numbers and scientific calculations.

And keep in mind that there is not a 1-to-1 relationship between an IEEE 32-bit single precision float (the variable you know as "float") and an integer. How many bytes are used to represent both? Float = 4 bytes. Integer = 4 bytes. They are literally the same size. They are literally both only capable of holding a permutation of their number of bits.

Damn C++ book lied to me

So...You want to fuck with SFML's source because you want to use a double over a float?

Not any more I did though beacuse I am apparently a terrible programmer

I'm really confused....
How big are your input values? Do you know what the range of a long is?...

19 digets.

Code: Select all

//Go The Desired Speed.//
GotoX *= Speed;
GotoY *= Speed;

This is where your values are messed up, I think...

Why do you think that?

Just to note, it looks like you don't have a good grasp on vectors. If you did, you would have probably used SFML's own vector2f class :P

hence...

Okay so I finally think I have a rough idea of vectors and I wrote these functions